S Parameters

These downloadable files contain 1 and 2 port S parameter data, 50 ohm reference impedance, from 50 to 1400 MHz or higher. They are in industry-standard .s1p and .s2p formats.

 

Typical measurement conditions and file formats:

 

! VCC = +3.3V. TA = +27C
! Input D
! Output Qbar
! Freq |S11| <S11 |S21| <S21 |S12| <S12 |S22| <S22
# MHZ S MA R 50

 

Some signal measurement ports are different and are noted accordingly in the file header.

 

Part Number	File
AZ10EL16VO	az10el16vo.s2p
AZ100EL16VO	az100el16vo.s2p
AZ100EP16FE (VCTRL = 2 V)	az100ep16fe.s2p
AZ100EP16VS (VCTRL = 2 V)	az100ep16vs.s2p
AZ100LVEL16VR (4 ma Qbar Current)	az100lvel16vr-4ma.s2p
AZ100LVEL16VR (8 ma Qbar Current)	az100lvel16vr-8ma.s2p
AZ100LVEL16VT (4 ma Qbar Current)	az100lvel16vt-4ma.s2p
AZ100LVEL16VT (8 ma Qbar Current)	az100lvel16vt-8ma.s2p
AZ100EL16VV	az100lvel16vv.s2p
AZP81 (D to Qbar)	azp81_D_to_Qbar.s2p
AZP81 (D to FLTRDR, FLTDRbar open [Square wave])	azp81_D_to_FLTRDR_Open.s2p
AZP81 (D to FLTRDR, FLTDRbar connected [Pulse wave])	azp81_D_to_FLTRDR_Connected.s2p
AZP81 (AMPIN, S11 only)	azp81_AMPIN.s1p
AZP92 (Divide by 1 mode)	azp92-div1.s2p
AZP92 (S11 only; Divide by 1, Divide by 2 modes)	azp92.s1p
AZP94 (Divide by 1 mode)	azp94-div1.s2p
AZP94 (S11 only; Divide by 1, Divide by 2 modes)	azp94.s1p
AZV99 (4 ma Qbar Current)	azv99-4ma.s2p
AZV99 (8 ma Qbar Current)	azv99-8ma.s2p

 

Return to our Home Page
 
 
Copyright © 2007 Arizona Microtek, Inc. All Rights Reserved.